WesAudio Calypso 500 Series ADAT Audio Interface w/ Titan 10-Slot Chassis

SKU
BU-WESAUDIO-CALYPSO-TITAN
$2,098.00
Out of stock
WesAudio Calypso 500 Series ADAT Audio Interface w/ Titan 10-Slot Chassis
WesAudio Calypso 500 Series ADAT Audio Interface w/ Titan 10-Slot Chassis

WesAudio Calypso 500 Series ADAT Audio Interface w/ 8 x 24-bit AD/DA Converters

CALYPSO is an audio interface designed to work in 500 series enclosure. It features state of art 8 channels of AD/DA conversion and perfectly integrates with ng500 chassis – _TITAN, through I.A.C. connector. Besides its very convenient integration with ng500 chassis, it still can be used in standard 500 series enclosure using two DB25 connectors.

Features

  • 24bit conversion
  • Supported sample rates: 44.1kHz, 48kHz, 88.2kHz(SMUX), 96kHz(SMUX)
  • Ultra low jitter clock
  • Word clock IN/OUT
  • Full integration with _TITAN via IAC connector (Just ADAT cables are need to route all signal to and from chassis)
  • Two DB25 connectors allows integration with any 500 series chassis
  • Two converter reference levels +8dBu/-10dBV
  • LCD screen with channel metering

WesAudio TITAN 10-slot NG500 Recall Chassis

TITAN is complete recall system designed to provide total integration with your beloved analogue equipment. It extends 500 series connector with additional pins where modules can be designed to support digital recall or any other vendor specific functionalities. This extension is part of new open standard “ng500” – “Next Generation 500 series” which allows other manufacturers to design and implement digitally controlled analog devices.

MAIN FEATURES

HIGH END LINEAR POWER SUPLY

Linear power supply capable to deliver 5A of power will bring sound of your units to the next level!

10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*)

_TITAN can host standarized 500 series module (Please read Important Note below).

Of course it was designed to recall up to 10 units with signle USB or Ethernet connection!

(*)Important note about 500 series extension : ng500

CONTROL ALL MODULES THROUGH ONE CONNECTION!

  • TITAN allows to control/recall all hosted modules through one connection:
  • 1) USB – for direct connection with your workstation.
  • 2) Ethernet – dedicated LAN connection to access all devices in your local network.

REMOTELY CONTROLED STEREO LINKS

TITAN provides simple standalone application to change status of stereo links between modules.

No more problems with accessing your chassis configuration!

IAC – INTERNAL AUDIO CONNECTOR

At slot number 10, _TITAN implements special connector, which routes all audio signals from and to, slots 1 – 8.

This allows future integration with audio interface modules, analog summing modules or patchbays.

INPUT source for any slot is implemented through analog relays, and it is configurable through standalone application. This prevents two different signal sources to be routed to the same module.

Features summary:

  • 10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*),
  • HIGH END LINEAR POWER SUPLY capable to deliver 5A of power,
  • CONTROL/RECALL ALL MODULES THROUGH ONE CONNECTION,
  • OPEN SPECIFICATION (**) – documentation and software framework including communication drivers for
    any Vendor that would like to adopt to this standard,
  • REMOTELY CONTROLED STEREO LINKS through standalone application,
  • IAC – INTERNAL AUDIO CONNECTOR – for future integration with audio interface, summing modules or patchbays

Features:

  • Stereo links are integrated with modules, and pressing “Link” button on modules which supports GCon protocol (e.g. _Mimas) sets stereo link on the _Titan.
  • Remote firmware upgrade – _Titan & all modules inside can be upgraded remotely through USB or Ethernet connection.
  • XLR sockets in/out for each slot.
  • Internal stereo link switches which can be also managed through GConManager standalone application.
  • Power mode switch – 115V/230V.

WesAudio Calypso 500 Series ADAT Audio Interface w/ 8 x 24-bit AD/DA Converters

General

  • Power consumption: 150mA per rail
  • Dimensions : 76x133x158mm

Inputs(ADC):

  • Freq. response – 20Hz-20kHzm +/- 0.1dB
  • THD+N (unweighted): -108dB (0.0004%)
  • Dynamic range (unweighted): 116dB
  • Gain Settings: +4 dBu / –10 dBV (selectable per input)
  • Maximum Input Level: (+4 dBu) +20 dBu
  • Input Impedance: 10K Ohms
  • Connector type: DB25/IAC

Outputs(DAC):

  • Freq. response – 20Hz-20kHzm +/- 0.1dB
  • THD+N (unweighted): -105dB (0.0005%)
  • Dynamic range (unweighted): 115dB
  • Gain Settings: +4 dBu / –10 dBV (selectable per output)
  • Maximum Output level: (+4 dBu) +20dBu
  • Output Impedance: 100 Ohms
  • Connector type: DB25/IAC
More Information
Condition New
SKU BU-WESAUDIO-CALYPSO-TITAN
UPC 7157325013
Weight 25.000000
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account