WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer w/ Titan 10-Slot Chassis

SKU
BU-WESAUDIO-HYPERION-TITAN
$2,498.00
Out of stock
WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer w/ Titan 10-Slot Chassis
WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer w/ Titan 10-Slot Chassis

WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer with Digital Recall

HYPERION is fully analog parametric EQ with +24dBu of headroom. It features a lot of innovative improvements that no other processor on the market provides. Its innovative design utilizes 15 VCAs per channel to provide essentially noiseless parameter changes and very musical nature. _HYPERION is next product in NG500 line where total recall is implemented through front panel USB socket or _TITAN chassis.

Features

  • +24dBu of headroom
  • Stereo / Dual mono / Mid/Side operation mode
  • 4-Band EQ with switchable gain range for 5db or 15dB boost or cut per band:
  • High band – 2kHz to 25kHz (bell or shelf)
  • High-Mid band – 600Hz to 8Khz with full Q control
  • Low-Mid band – 200Hz to 2.5Khz with full Q control
  • Low band – 30 Hz to 350Hz (bell or shelf)
  • HPF with 12dB/Oct or 6 dB/Oct slopes
  • Each band features its own Bypass switch
  • Essentially Noiseless parameter changes
  • Proprietary THD implementation
  • Flexible DAW/Live plug-in control for instant recall
  • 12 touch sensitive encoders allows to record automation
  • True bypass
  • In and OUT metering with clip detection
  • A/B compare feature

WesAudio TITAN 10-slot NG500 Recall Chassis

TITAN is complete recall system designed to provide total integration with your beloved analogue equipment. It extends 500 series connector with additional pins where modules can be designed to support digital recall or any other vendor specific functionalities. This extension is part of new open standard “ng500” – “Next Generation 500 series” which allows other manufacturers to design and implement digitally controlled analog devices.

MAIN FEATURES

HIGH END LINEAR POWER SUPLY

Linear power supply capable to deliver 5A of power will bring sound of your units to the next level!

10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*)

_TITAN can host standarized 500 series module (Please read Important Note below).

Of course it was designed to recall up to 10 units with signle USB or Ethernet connection!

(*)Important note about 500 series extension : ng500

CONTROL ALL MODULES THROUGH ONE CONNECTION!

  • TITAN allows to control/recall all hosted modules through one connection:
  • 1) USB – for direct connection with your workstation.
  • 2) Ethernet – dedicated LAN connection to access all devices in your local network.

REMOTELY CONTROLED STEREO LINKS

TITAN provides simple standalone application to change status of stereo links between modules.

No more problems with accessing your chassis configuration!

IAC – INTERNAL AUDIO CONNECTOR

At slot number 10, _TITAN implements special connector, which routes all audio signals from and to, slots 1 – 8.

This allows future integration with audio interface modules, analog summing modules or patchbays.

INPUT source for any slot is implemented through analog relays, and it is configurable through standalone application. This prevents two different signal sources to be routed to the same module.

Features summary:

  • 10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*),
  • HIGH END LINEAR POWER SUPLY capable to deliver 5A of power,
  • CONTROL/RECALL ALL MODULES THROUGH ONE CONNECTION,
  • OPEN SPECIFICATION (**) – documentation and software framework including communication drivers for
    any Vendor that would like to adopt to this standard,
  • REMOTELY CONTROLED STEREO LINKS through standalone application,
  • IAC – INTERNAL AUDIO CONNECTOR – for future integration with audio interface, summing modules or patchbays

Features:

  • Stereo links are integrated with modules, and pressing “Link” button on modules which supports GCon protocol (e.g. _Mimas) sets stereo link on the _Titan.
  • Remote firmware upgrade – _Titan & all modules inside can be upgraded remotely through USB or Ethernet connection.
  • XLR sockets in/out for each slot.
  • Internal stereo link switches which can be also managed through GConManager standalone application.
  • Power mode switch – 115V/230V.

WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer with Digital Recall

  • Frequency response: 10Hz-150kHz (-2dB)
  • THD+N all bands gain “0”: 0.003% (1kHz,0dBu)
  • THD+N +15dB band boost: <0.15% (1kHz,0dBu)
  • Input impedance: 10kohm
  • Output impedance: <100ohm
  • Max signal level: +24dBu
  • Crosstalk:< -100dB
  • THD (MID switch): 1%
  • THD (HIGH switch): 2.5%
  • Power consumption: 150mA per rail
  • Dimensions : 76x133x158mm
  • Unit needs to warm up for about 5 minutes before usage as its temperature
  • may affect some internal variables – like frequencies of each band, and very slightly gain and Q settings.
  • Each band can boost or cut in configurable gain mode (It affects also
  • OUTPUT control):
  • 15dB boost or cut in 0.25 dB steps,
  • 5dB boost or cut in 0.083 dB steps,
  • Each frequency control has predefined amount of steps in logarithmic
  • scale:
  • HF frequency – 256 steps,
  • HMF frequency – 256 steps,
  • LMF frequency – 256 steps,
  • LF frequency – 200 steps,
  • HPF frequency – 128 steps.
More Information
Condition New
SKU BU-WESAUDIO-HYPERION-TITAN
UPC 7157325010
Weight 25.000000
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account