WesAudio ngLEVELER 16-Channel Analog Automation System w/ Digital Control

SKU
WESAUDIO-NGLEVELER
$1,999.00
Out of stock
WesAudio ngLEVELER 16-Channel Analog Automation System w/ Digital Control WesAudio ngLEVELER 16-Channel Analog Automation System w/ Digital Control
WesAudio ngLEVELER 16-Channel Analog Automation System w/ Digital Control

ngLeveler

16-channel next generation automation system

ngLEVELER – “Next generation Leveler” is analog automation system with convenient features for better studio integration. Besides its automation engine it also brings analog saturation per each channel which helps tracks to get more presence in the mix. ngLEVELER doesn’t have any controls, it is either managable via:

  • DAW Plug-in
  • HUI controller
  • Or both

This approach gives us very convenient fader control with true total recall system via DAW plug-in. ngLEVELER was created to become studio centerpiece, and because of its simple analog connectivity it can be used in many applications!

Features

  • 16 channels of analog automation with total recall
  • +25dBu(IN) / +28dBu(OUT) of headroom
  • 6dB passive attenuator (PAD)
  • Very low noise and distortion – THD+N < 0.01%
  • MUTE and SOLO
  • HUI controller integration
  • 16 channels of Proprietary THD
  • IN and OUT (before and after signal leveling) metering
  • Flexible DAW/Live plug-in
  • DB-25 analog connectivity
  • Ethernet or USB

ANALOG SOUND, DIGITAL CONTROL

Regardless its digital control features, ngLeveler is fully analog unit.

Dedicated plugin control allows to recall and automate your analog signals with ease!

1. Opposite quad channel link: This functionality links two stereo channels in an opposite way, it means that by pushing level of channel 1 & 2, channel 3 & 4 signal will be lowered by the same amount, perfect solution to drive our stereo analog units maintaining the same signal level.

Monitoring!

MUTE – channel is muted.
SOLO – Any channel with solo active will pass the signal with full processing
unless it is not explicitly muted. Hitting solo on particular channel will
also mute all other channels unless solo or solo safe is not engaged.

TRIM MODE!

Trim mode allows us to change level of each channel on top of already setup Faders. Trim faders also work in very high resolution as whole TRIM fader work in limited scale -10dB to +5dB. Such approach gives us few important benefits.

CHANNEL GROUPS!

Assign each channel to one of 4 groups which technically link all parameters in particular group. Some parameters maybe disabled from groping:

Main features summary:

  • 16 channels of analog automation with total recall
  • +25dBu(IN) / +28dBu(OUT) of headroom
  • 6dB passive attenuator (PAD) for better integration with high level signals
  • Very low noise and distortion – THD+N 0.01%
  • MUTE and SOLO for each channel
  • HUI controller integration
  • 16 channels of Proprietary THD
  • IN and OUT (before and after signal leveling) metering fully integrated with DAW plug-in
  • Flexible DAW/Live plug-in control for instant recall
  • DB-25 analog connectivity
  • Management via Ethernet or USB
  • Fully digitally controlled and isolated analog circuit,
  • Full automation record via HUI
  • Free software and firmware upgrades
  • THD+N(20Hz-20kHz): at 0dBu < 0.008%
  • Freq response: 0-250kHz (-3dB)
  • Input impedance: > 10kohm
  • Output impedance: < 50ohm
  • Crosstalk: > 100dB
  • Max input level: +25dBu
  • Max output level: +28dBu
  • Dynamic range: > 118dB
  • Hardware Digital resolution: ~2500 steps per channel*
More Information
Condition New
SKU WESAUDIO-NGLEVELER
UPC 5906660299127
Weight 19.000000
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account