SKU
TCM-DR701D
$499.00
Out of stock
The DR-701D is TASCAM's flagship recorder for single-shooter video production. A timecode generator is included for location reference, which can be jam synced from a SMPTE generator, camera, or smart slate. The HDMI in and out allows a DSLR camera to start recording on both devices, and video clock prevents drift between sound and picture.
Four mic inputs can be individually recorded and mixed to a stereo track, for a total of six-track recording. For additional tracks, multiple units can be cascaded together. The lightweight yet rigid chassis is forged from a magnesium alloy. Tripod mounts on the top and bottom of the unit allow the unit to mount under a camera, attach to a follow-focus cage, or used stand-alone.
Designed for the needs of professional filmmakers, television producers, advertisers, and documentarians, the DR-701D packs high quality multitrack recording into a package compact enough for use with any camera.
Features:
- SD/SDHC/SDXC cards used for recording media.
- 6 maximum simultaneous recording tracks
- MONO, STEREO, 2MIX, DUAL MONO, DUAL ST and DUAL2MIX recording modes
- Recording formats: 16/24-bit, 44.1/48/96/192kHz (WAV/BWF) (192kHz only for two-track recording)
- Built-in original TASCAM HDDA mic preamps provide high audio quality
- Input levels can be adjusted separately for each track
- XLR/TRS inputs support +4dBu line level and 24/48V phantom power
- Clock and record start/stop can be synchronized with a camera using the HDMI port
- DR-701D audio signal can be output to an external camera or recorder from the HDMI OUT or line output
- Cascade function using HDMI connections allows multiple DR-701D transport and monitoring operations
- SMPTE Timecode can be input through the TC IN connector to add recording start times to files
- Timecode generator (RTC) allows recording start times to be added to files even when there is no timecode input
- Plug-in power mics and high output mics (EXT IN 1/2) supported
- OUT (CAMERA OUT) connector can output audio mixed by the DR-701D to a DSLR camera
- IN (CAMERA IN) connector enables monitoring the sound from a DSLR camera through the DR-701D
- High quality audio output through a line output jack separate from the headphones jack
- Headphones jack with 50mW+50mW maximum output
- Tripod attachment threads (bottom), camera screw attachment that can be installed or removed with a coin (top) and shoe mount (top) included
- Handles on the left and right sides of the front protect the control surface and also enable attachment of a shoulder strap
- Transport and SLATE buttons made of rubber suppress noise during operation
- HOLD switch prevents misoperation
- 128×64-dot graphic LCD with backlight
- LED lights have high visibility even in direct sunlight
- High-speed transfer of files to computers possible using USB 2.0
- Micro-B type USB cable included
- Powered by 4 AA batteries, USB bus power or a PS-P515U AC adapter (sold separately)
- BP-6AA external battery pack (sold separately) enables operation for even longer times
- Optional RC-3F foot switch and RC-10 wireless remote control can be connected (both sold separately)
- Built-in mixer enables pan and level adjustments as well as solo monitoring and can output a mix of 4 channels
- GANG function allows the levels of multiple channels to be controlled simultaneously
- Individual channel trim settings shown
- 5-position low-cut filter (50/80/120/180/220 Hz) cuts unwanted low frequencies
- Multiband limiter automatically adjusts input overloads (stereo-linking possible with 1/L and 2/R)
- Delay function can compensate for distances between mics (+/-150 ms)
- Mid-side decoder function enables use with mid-side stereo mics
- Slate tone insertion functions (AUTO/MANUAL)
- Slate tone insertion points can be selected (recording start or recording start and stop when slate AUTO function used)
- Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
- Recording format
- WAV: 44.1k/48k/96k/192k Hz, 16/24-bit
- BWF: 44.1k/48k/96k/192k Hz, 16/24-bit
- Number of input channels
- 44.1k/48k/96k Hz: 4 maximum
- 192kHz: 2 maximum
- Number of recording tracks
- 44.1k/48k/96k Hz: 6 maximum
- 192kHz: 2 maximum
- Analog audio inputs: *The maximum input level the level that the input knob can be adjusted and a digital full-scale(0dBFS) signal can be input without distorting.
- *The minimum input level is the level that the input knob can be adjusted and a -20dBFS signal can be input.
- IN 1, IN 2, IN 3, IN 4: XLR can provide phantom power
- Connectors
- XLR-3-31 (1:GND, 2:HOT, 3:COLD)
- 6.3mm(1/4")standard TRS jacks(tip:HOT, Ring:COLD, Sleeve:GND)
- Input gain: ”LOW”/”MID”/”HI”/”HI+
- Input impedance: 2k ohms
- Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
- Maximum input level: +4dBu
- Minimum input level: -72dBu
- MIC input gain: TRIM MAX
- LOW: +20dB
- MID: +40dB
- HI: +52dB
- HI+: +64dB
- Input gain: LINE
- Input impedance: 10k ohms
- Nominal input level: +4dBu
- Maximum input level: +24dBu
- EXT IN 1/2
- Connector: 3.5mm(1/8")stereo mini jack (can provide plug-in power)
- Input impedance: 10k ohms
- Maximum input level: +10dBV
- Minimum input level: -50dBV
- MIC input gain: TRIM MAX
- LOW: +3dB
- MID: +11dB
- HI: +26dB
- HI+: +38dB
- IN
- Connector: 3.5mm(1/8")stereo mini jack
- Input impedance: 10k ohms
- Nominal input level: -10dBV
- Maximum input level: +6dBV
- Analog audio outputs
- LINE OUT
- Connector: 3.5mm(1/8")stereo mini jack
- Output impedance: 200 ohms
- Nominal output level: -14dBV
- Maximum output level: +6dBV
- OUT
- Connector: 3.5mm(1/8")stereo mini jack
- Output impedance: 200 ohms
- Nominal output level: -44dBV
- Maximum output level: +6dBV
- PHONES
- Connector: 3.5mm(1/8")stereo mini jack
- Maximum output: 50mW + 50mW
- Control inputs/outputs:
- HDMI IN/OUT:
- Connectors: Type A receptacle
- USB
- Connector: Micro-B
- Format: USB2.0 HIGH SPEED mass storage class
- TIMECODE IN
- Connector: BNCConnector
- Signal voltage amplitude: 0.5Vp-p to 5Vp-p
- Input impedance: 10k ohms
- Format: SMPTE 12M-1999 compliant
- REMOTE
- Connector: 2.5mm TRS jack
- Power: 4 AA batteries(Alkaline, NI-MH or lithium),
- AC adapter(TASCAM PS-P515U, sold separately),
- External battery pack(TASCAM BP-6AA, sold separately)
- Power consumption: 6.5W(maximum)
- Current consumption (USB bus power): 1.3A(maximum)
- Battery operation time (continuous operation): 2ch WAV, 48kHz, 16bit rec
- *When using phantom power, the operation time might be reduced depending on the mic being used.
- DR-701D
- Lithium(Energizer ULTIMATE LITHIUM)
- About 7:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
- About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
- About 3:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
- NI-MH batteries(eneloop)
- About 4:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
- About 2:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
- About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
- Alkaline batteries (EVOLTA)
- About 3:45 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
- About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
- About 1:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
- DR-701D + BP-6AA: *BP-6AA is using the alkaline batteries (EVOLTA).
- Lithium batteries (Energizer ULTIMATE LITHIUM)
- About 12:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
- About 7:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
- About 5:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
- NI-MH batteries(eneloop)
- About 9:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
- About 7:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
- About 4:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
- Alkaline batteries(EVOLTA)
- About 9:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
- About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
- About 3:45 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
- Dimensions: 169(W)×57.3(H)×113.5(D)mm (with the top adapter attached)
- Weight: 654g (including batteries) / 567g (without batteries)
- Operating temperature: 0°C to 40°C
- Standard accessories: USB cable, Camera attachment bracket screw hole covers × 6 Owner's Manual (including warranty)
- Audio performance
- Frequency response
- 20-20kHz +0.5/-1dB(LINE IN to LINE OUT, Fs48kHz, JEITA)
- 20-40kHz +0.5/-1dB(LINE IN to LINE OUT, Fs96kHz, JEITA)
- 20-80kHz +0.5/-5dB(LINE IN to LINE OUT, Fs192kHz, JEITA)
- Distortion: 0.007% or less(MIC IN to LINE OUT Fs44.1k/48k/96k/192k Hz, JEITA)
- S/N ratio: 100dB or more
- (MIC IN to LINE OUT, -10dBu??, 1kHz, Fs44.1k/48k/96k/192k Hz, JEITA)
- Equivalent input noise: -124dBu or less
Condition | New |
---|---|
SKU | TCM-DR701D |
UPC | 43774031986 |
Write Your Own Review